Part Number Hot Search : 
SB510 40N03 BFG591 CY7C1011 4733A DTL3A SD125 SD5000R
Product Description
Full Text Search
 

To Download TLA-6T122LF Datasheet File
  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
　
 

  Datasheet File OCR Text:
  ? all specifications are subject to change without notice. ? conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications. issue date: april 2012 pulse transformers tla /alt series
pulse transformers/pin terminal type tla-3t101lf(-t) 10base-2/5/t .. ................. ................. .................2 tla-3t106lf(-t) 10base-t......... .............. .............. .............. .........4 tla-3t107lf(-t) 10base-t......... .............. .............. .............. .........4 tla-3t105lf(-t) 10base-t......... .............. .............. .............. .........6 tla-3t109lf(-t) 10base-t......... .............. .............. .............. .........6 tla-3t110lf(-t) 10base-t......... .............. .............. .............. .........6 tla-3t112lf(-t) 10base-t......... .............. .............. .............. .........6 tla-6t103lf(-t) 10/100base-tx ..... ................. .............. ..............8 tla-6t118lf(-t) 10/100base-tx ..... ................. .............. ..............10 tla-6t119lf(-t) 10/100base-tx ..... ................. .............. ..............10 tla-6t120lf(-t) 10/100base-tx ..... ................. .............. ..............10 tla-6t121lf(-t) 10/100base-tx ..... ................. .............. ..............10 TLA-6T122LF(-t) 10/100base-tx ..... ................. .............. ..............10 tla-6t127lf(-t) 10/100base-tx, poe........ ................. .................12 tla-6t133wlf(-t) 10/100base-tx ................ ................. ..............14 tla-6t214alf(-t) 10/100/1000base-t ....... .............. ........... .........16 tla-6t213lf(-t) y 10/100/1000base-tx...... .............. ........... .........18 tla-7t201lf(-t) y 10/100/1000base-tx...... .............. ........... .........20 tla-6t406(-t) y 10/100base-tx .....................................................22 tla-7t101lf(-t) y 10/100/1000base-t ........ ................. .................24 pulse transformers/connector type tla-6t776f y 10/100base-tx......... ................. ................. ..............26 tla-6t785 y 10/100base-tx........... ................. ................. ..............28 lc modules tla-3m103lf(-t) y 10base-t ......................................................30 pulse transformers/smd type alt4532 .........................................................................................32 precautions the tdk products in this data are intended for usage in general electronics applications (computer, per- sonal equipment, office e quipment, measur ing equipment, industrial robotics, domestic appliances, etc.). they are neither intend nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (atomic energy control instruments, airplane or spaceship instruments, transportation instrument, traffic signal instruments, combustion control instrument, medical instruments, all types of safety devices, etc.). ? conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications. pulse transformers tla/alt series contents page
(2/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. pulse transformers tla/alt series pulse transformers/pin terminal type tla-3t101lf(-t) iso8802.3(ieee802.3) 10base2/5/-t features ? product conforming to rohs directive. ? can be mounted with lead-free solder (260c max.). ? 16-pin smd package(1.27mm=50mil pin pitch). ? using the high-quality and wide-band ferrite cores for lan. ? packaging specification is taping and bulk(tla-3t101lf-t: tape and reel, tla-3t101lf: bulk). general specifications shapes and dimensions circuit diagram recommended pc board pattern electrical characteristics ? ta=25c pulse transformer 3 port 1 temperature ranges operating 0 to +70c storage C40 to +85c withstanding voltage erms:2000v[60s] part no. turns ratio   : - , ! " : * ) $ % : ' & inductance ( p h)typ.[100khz]  -  ! - " $ - % leakage inductance ( p h)max.[100khz]  -  [ - - , shorted] ! - " [ * - ) shorted] $ - % [ ' - & shorted] inter-winding stray capacitance (pf)max.[100khz]   - - , ! " - * ) $ % - ' & dc resistance ( : )max.  -  , - - , ! - " , * - ) $ - % , ' - & tla-3t101lf(-t) 1:1 100 0.25 10 0.35, 0.35 1.27typ. 11.6max. 5.9max. 9.2 0.2 6.8typ. 0.5typ.  ?? tdk ??? part no. lot no. 0.45typ. 0.25typ. ??? : country of origin dimensions in mm 0.10max. n.c. pins: # ( +   - , + ! " # $ % * ) ( ' & dimensions in mm 9.8 3.4 1.4 8.89 1.27  % - & 0.9 secondary signal pattern (connected no. & - - ) keep out area primary signal pattern (connected no.  - % ) keep out area ? conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
(3/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. packaging styles quantity : 1000pieces/reel tape dimensions reel dimensions recommended soldering condition reflow soldering ? temperature is measured at the terminal portion of product (using thermocoupler for measurement). ? this profile is reference data we recommend. please check in your actual process. ? for reliable soldering, the t hickness of solder paste screen should be over the terminal co-planality. ? the cutted end of terminal has no plating(out of subject of solder ability). recommended condition for long term store when it stores for a long term, please avoid place of high tempera- ture and high humidity. recommend that it uses after the delivery within 1year. temperature range: +5 to +30c humidity: 60(%)rh max. 24 0.3 (12.4) 11.5 1.75 4 10 5.9 2 12 ?1.5+0.1, -0 0.4 dimensions in mm ?330typ. 30.4max. 2 0.5 ? 13 0.2 ? 21 0.8 dimensions in mm 260?c max. 230?c 165 15?c 2?c/s 120s max. 1 to 2?c/s time ( s ) natural cooling 30s max.
(4/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. tla-3t106lf(-t)/107lf(-t) iso8802.3(ieee802.3) 10base-t features ? product conforming to rohs directive. ? can be mounted with lead-free solder (260c max.). ? 16-pin smd package(1.27mm=50mil pin pitch). ? using the high-quality and wide-band ferrite cores for lan. ? packaging specification is taping and bulk(tla-3t10 lf-t: tape and reel, tla-3t10 lf: bulk). general specifications shapes and dimensions circuit diagram recommended pc board pattern electrical characteristics ? ta=25c pulse transformer 4 port 4 temperature ranges operating 0 to +70c storage C40 to +85c withstanding voltage erms: 2000v[60s] part no. tu r n s r a t i o   : - , ! : + * " # : ) ( $ % : ' & inductance ( p h)min.[100khz]  -  - ! " - # $ - % leakage inductance ( p h)max.[100khz]  -  [ - - , shorted] - ! [ + - * shorted] " - # [ ) - ( shorted] $ - % [ ' - & shorted] inter-winding stray capacitance (pf)max.[100khz]   - - , ! - + * " # - ) ( $ % - ' & dc resistance ( : )max.  -  , - - , - ! , + - * " - # , ) - ( $ - % , ' - & tla-3t106lf(-t) 1:1 130 0.3 12 0.4, 0.4 tla-3t107lf(-t) 1:1.41 130 0.3 12 0.4, 0.5   - , + ! " # $ % * ) ( ' & 1.27typ. 11.6max. 5.9max. 9.2 0.2 6.8typ. 0.5typ. - &  % tdk ??? part no. lot no. 0.45typ. 0.25typ. ??? : country of origin dimensions in mm 0.10max. dimensions in mm 9.8 3.4 1.4 8.89 1.27  % - & 0.9 secondary signal pattern (connected no. & - - ) keep out area primary signal pattern (connected no.  - % ) keep out area ? conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
(5/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. packaging styles quantity : 1000pieces/reel tape dimensions reel dimensions recommended soldering condition reflow soldering ? temperature is measured at the terminal portion of product (using thermocoupler for measurement). ? this profile is reference data we recommend. please check in your actual process. ? for reliable soldering, the t hickness of solder paste screen should be over the terminal co-planality. ? the cutted end of terminal has no plating(out of subject of solder ability). recommended condition for long term store when it stores for a long term, please avoid place of high tempera- ture and high humidity. recommend that it uses after the delivery within 1year. temperature range: +5 to +30c humidity: 60(%)rh max. 24 0.3 (12.4) 11.5 1.75 4 10 5.9 2 12 ?1.5+0.1, -0 0.4 dimensions in mm ?330typ. 30.4max. 2 0.5 ? 13 0.2 ? 21 0.8 dimensions in mm 260?c max. 230?c 165 15?c 2?c/s 120s max. 1 to 2?c/s time ( s ) natural cooling 30s max.
(6/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. tla-3t105lf(-t)/109lf(-t)/110lf(-t)/112lf(-t) iso8802.3(ieee802.3) 10base-t features ? product conforming to rohs directive. ? can be mounted with lead-free solder (260c max.). ? 16-pin smd package(1.27mm=50mil pin pitch). ? using the high-quality and wide-band ferrite cores for lan. ? packaging specification is taping and bulk(tla-3t1 lf-t: tape and reel, tla-3t1 lf: bulk). general specifications shapes and dimensions circuit diagram recommended pc board pattern electrical characteristics ? ta=25c pulse transformer 2 common-mode choke 2 port 1 temperature ranges operating 0 to +70c storage C40 to +85c withstanding voltage erms: 2000v[60s] part no. tu r n s r a t i o   : - , + # $ % : ( ' & inductance ( p h)min.[100khz]  - # - % leakage inductance ( p h)max.[100khz]  - [ - - + shorted] # - % [ ( - & shorted] inter-winding stray capacitance (pf)max.[100khz]  - - + # % - ( & dc resistance ( : )max.  - # - % tla-3t105lf(-t) 1ct:1ct 130 0.3 12 0.5 1ct:1ct 130 0.3 12 0.5 tla-3t109lf(-t) 2ct:1ct 130 0.95 12 0.5 1ct:1ct 130 0.35 12 0.5 tla-3t110lf(-t) 1ct:1ct 130 0.35 12 0.5 1ct:1.41ct 130 0.35 12 0.5 tla-3t112lf(-t) 1ct:1ct 130 0.35 12 0.85 1ct:2.5ct 130 0.35 12 0.85 n.c. pins: ! " ) *   - , + ! " # $ % * ) ( ' & 1.27typ. 11.6max. 5.9max. 9.2 0.2 6.8typ. 0.5typ. - &  % tdk ??? part no. lot no. 0.45typ. 0.25typ. ??? : country of origin dimensions in mm 0.10max. dimensions in mm 9.8 3.4 1.4 8.89 1.27  % - & 0.9 secondary signal pattern (connected no. & - - ) keep out area primary signal pattern (connected no.  - % ) keep out area conformity to ros directie: tis means tat, in conformity it e directie 200295ec, lead, cadmium, mercury, exaalent cromium, and specific romine-ased flame retardants, pbb and pbde, ae not een used, except for exempted applications.
(7/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. packaging styles quantity : 1000pieces/reel tape dimensions reel dimensions recommended soldering condition reflow soldering ? temperature is measured at the terminal portion of product (using thermocoupler for measurement). ? this profile is reference data we recommend. please check in your actual process. ? for reliable soldering, the t hickness of solder paste screen should be over the terminal co-planality. ? the cutted end of terminal has no plating(out of subject of solder ability). recommended condition for long term store when it stores for a long term, please avoid place of high tempera- ture and high humidity. recommend that it uses after the delivery within 1year. temperature range: +5 to +30c humidity: 60(%)rh max. 24 0.3 (12.4) 11.5 1.75 4 10 5.9 2 12 ?1.5+0.1, -0 0.4 dimensions in mm ?330typ. 30.4max. 2 0.5 ? 13 0.2 ? 21 0.8 dimensions in mm 260?c max. 230?c 165 15?c 2?c/s 120s max. 1 to 2?c/s time ( s ) natural cooling 30s max.
(8/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. tla-6t103lf(-t) iso8802.3(ieee802.3) 10/100base-tx & atm features ? product conforming to rohs directive. ? can be mounted with lead-free solder (260c max.). ? 16-pin smd package(2.54mm=100mil pin pitch). ? excellent common-mode noise suppression. ? inductance is 350h or greater (f=100khz, dc bias=8ma). ? using the high-quality and wide-band ferrite cores for lan. ? packaging specification is taping and bulk(tla-6t103lf-t: tape and reel, tla-6t103lf: bulk). general specifications shapes and dimensions circuit diagram recommended pc board pattern electrical characteristics ? ta=25c pulse transformer 2 common-mode choke 2 inductor 1 port 1 temperature ranges operating 0 to +70c storage C40 to +85c withstanding voltage erms:1500v[60s] part no. turns ratio , + - : ( ) '   : $ " # inductance ( p h)min. [dc bias 8ma, 100khz] ( - ' $ - # insertion loss (db)max. [0.1 to 100mhz] , - - ( ' $ # -   inter-winding stray capacitance (pf)max.[100khz] , - - ( '   - $ # tla-6t103lf(-t) 1ct:1ct 350 1 25 1ct:1ct 350 1 25 2.54typ. 25.7max. 5.95max. 12.5 0.3 9.3typ. 0.8typ. tdk ??? part no. lot no. 0.45typ. 0.25typ. ??? : country of origin dimensions in mm 0.10max. - &  % n.c. pins: ! % & *   $ # , ( ' - + " tx rx 1ct:1ct 1ct:1ct ) 17.78 dimensions in mm 2.54 1.02  % - & 2.54 8.64 13.72 5.0 secondary signal pattern (connected no. " - $ , ' - ) ) keep out area primary signal pattern (connected no.  - , + - - ) keep out area ? conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
(9/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. packaging styles quantity : 600pieces/reel tape dimensions reel dimensions recommended soldering condition reflow soldering ? temperature is measured at the terminal portion of product (using thermocoupler for measurement). ? this profile is reference data we recommend. please check in your actual process. ? for reliable soldering, the t hickness of solder paste screen should be over the terminal co-planality. ? the cutted end of terminal has no plating(out of subject of solder ability). recommended condition for long term store when it stores for a long term, please avoid place of high tempera- ture and high humidity. recommend that it uses after the delivery within 1year. temperature range: +5 to +30c humidity: 60(%)rh max. 40.4 44 0.3 (25.9) 20.2 6.1 2 16 4 13.1 ?1.5+0.1, -0 0.4 1.7 1.75 dimensions in mm ?330typ. 50.4max. 2 0.5 ? 13 0.2 ? 21 0.8 dimensions in mm 260?c max. 230?c 165 15?c 2?c/s 120s max. 1 to 2?c/s time ( s ) natural cooling 30s max.
(10/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. tla-6t118lf/119lf/120lf/121lf/122lf(-t) iso8802.3(ieee802.3) 10/100base-tx features ? product conforming to rohs directive. ? can be mounted with lead-free solder (260c max.). ? 16-pin smd package(1.27mm=50mil pin pitch). ? excellent common mode noise suppression. ? inductance is 350h or greater (f=100khz, dc bias=8ma). ? using the high-quality and wide-band ferrite cores for lan. ? packaging specification is taping and bulk(tla-6t1 lf-t: tape and reel, tla-6t1 lf: bulk). general specifications shapes and dimensions circuit diagram recommended pc board pattern electrical characteristics ? ta=25c pulse transformer 2 common-mode choke 2 port 1 temperature ranges operating 0 to +70c storage C40 to +85c withstanding voltage erms:1500v[60s] part no. turns ratio   : - , + # $ % : ( ' & inductance ( p h)min. [dc bias 8ma, 100khz] - - + ( - & insertion loss (db)max. [0.1 to 100mhz]  - - + ( & - # % inter-winding stray capacitance (pf)max.[100khz]  - - + # % - ( & tla-6t118lf(-t) 1ct:1ct 350 1 25 1ct:1ct 350 1 25 tla-6t119lf(-t) 1.41ct:1ct 350 2 25 1ct:1ct 350 1 25 tla-6t120lf(-t) 2ct:1ct 350 3.5 25 1ct:1ct 350 1 25 tla-6t121lf(-t) 1ct:1.41ct 350 2.5 25 1ct:1ct 350 1 25 TLA-6T122LF(-t) 1.25ct:1ct 350 2 25 1ct:1ct 350 1 25 n.c. pins: ! " ) * tx rx   - , + ! " # $ % * ) ( ' & 1.27typ. 11.6max. 5.9max. 9.2 0.2 6.8typ. 0.5typ. tdk ??? part no. lot no. 0.45typ. 0.25typ. ??? : country of origin dimensions in mm 0.10max. - &  % dimensions in mm 9.8 3.4 1.4 8.89 1.27 0.9 secondary signal pattern (connected no. & - - ) keep out area primary signal pattern (connected no.  - % ) keep out area  % - & ? conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
(11/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. packaging styles quantity : 1000pieces/reel tape dimensions reel dimensions recommended soldering condition reflow soldering ? temperature is measured at the terminal portion of product (using thermocoupler for measurement). ? this profile is reference data we recommend. please check in your actual process. ? for reliable soldering, the t hickness of solder paste screen should be over the terminal co-planality. ? the cutted end of terminal has no plating(out of subject of solder ability). recommended condition for long term store when it stores for a long term, please avoid place of high tempera- ture and high humidity. recommend that it uses after the delivery within 1year. temperature range: +5 to +30c humidity: 60(%)rh max. 24 0.3 (12.4) 11.5 1.75 4 10 5.9 2 12 ?1.5+0.1, -0 0.4 dimensions in mm ?330typ. 30.4max. 2 0.5 ? 13 0.2 ? 21 0.8 dimensions in mm 260?c max. 230?c 165 15?c 2?c/s 120s max. 1 to 2?c/s time ( s ) natural cooling 30s max.
(12/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. tla-6t127lf(-t) iso8802.3(ieee802.3) 10/100base-tx, power over ethernet features ? product conforming to rohs directive. ? can be mounted with lead-free solder (260c max.). ? 16-pin smd package(1.27mm=50mil pin pitch). ? inductance is 350h or greater (f=100khz, dc bias=8ma). ? allowable current is 350ma max. ? excellent common mode noise suppression under the power transmission. ? packaging specification is taping and bulk(tla-6t127lf-t: tape and reel, tla-6t127lf: bulk). general specifications shapes and dimensions circuit diagram recommended pc board pattern electrical characteristics ? ta=25c pulse transformer 2 common-mode choke 2 port 1 temperature ranges operating 0 to +70c storage C40 to +85c withstanding voltage erms:1500v[60s] part no. turns ratio   : - , + # $ % : ( ' & inductance ( p h)min. [dc bias 8ma, 100khz] - - + ( - & insertion loss (db)max. [0.1 to 100mhz]  - - + ( & - # % inter-winding stray capacitance (pf)max.[100khz]  - - + # % - ( & tla-6t127lf(-t) 1ct:1ct 350 1 25 1ct:1ct 350 1 25 n.c. pins: ! " rx tx   - , + ! " # $ % * ) ( ' & 1.27typ. 11.6max. 5.9max. 9.2 0.2 6.8typ. 0.5typ. tdk ??? part no. lot no. 0.45typ. 0.25typ. ??? : country of origin dimensions in mm 0.10max. - &  % dimensions in mm 9.8 3.4 1.4 8.89 1.27 0.9 secondary signal pattern (connected no. & - - ) keep out area primary signal pattern (connected no.  - % ) keep out area  % - & ? conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
(13/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. packaging styles quantity : 1000pieces/reel tape dimensions reel dimensions recommended soldering condition reflow soldering ? temperature is measured at the terminal portion of product (using thermocoupler for measurement). ? this profile is reference data we recommend. please check in your actual process. ? for reliable soldering, the t hickness of solder paste screen should be over the terminal co-planality. ? the cutted end of terminal has no plating(out of subject of solder ability). recommended condition for long term store when it stores for a long term, please avoid place of high tempera- ture and high humidity. recommend that it uses after the delivery within 1year. temperature range: +5 to +30c humidity: 60(%)rh max. 24 0.3 (12.4) 11.5 1.75 4 10 5.9 2 12 ?1.5+0.1, -0 0.4 dimensions in mm ?330typ. 30.4max. 2 0.5 ? 13 0.2 ? 21 0.8 dimensions in mm 260?c max. 230?c 165 15?c 2?c/s 120s max. 1 to 2?c/s time ( s ) natural cooling 30s max.
(14/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. tla-6t133wlf(-t) iso8802.3(ieee802.3) 10/100base-tx features ? can be used in the wide range of temperature(C40 to +85c). ? product conforming to rohs directive. ? can be mounted with lead-free solder (260c max.). ? 16-pin smd package(1.27mm=50mil pin pitch). ? excellent common mode noise suppression. ? inductance is 350h or greater (f=100khz, dc bias=8ma). ? using the high-quality and wide-band ferrite cores for lan. ? packaging specification is taping and bulk(tla-6t133wlf-t: tape and reel, tla-6t133wlf: bulk). general specifications shapes and dimensions circuit diagram recommended pc board pattern electrical characteristics ? ta=25c pulse transformer 2 common-mode choke 2 port 1 temperature ranges operating C40 to +85c storage C40 to +85c withstanding voltage erms:1500v[60s] part no. turns ratio   : - , + # $ % : ( ' & inductance ( p h)min. [dc bias 8ma, 100khz] - - + ( - & insertion loss (db)max. [0.1 to 100mhz]  - - + ( & - # % inter-winding stray capacitance (pf)max.[100khz]  - - + # % - ( & tla-6t133wlf(-t) 1ct:1ct 350 1 25 1ct:1ct 350 1 25 n.c. pins: ! " ) * tx rx   - , + ! " # $ % * ) ( ' & 1.27typ. 11.6max. 5.9max. 9.2 0.2 6.8typ. 0.5typ. tdk ??? part no. lot no. 0.45typ. 0.25typ. ??? : country of origin dimensions in mm 0.10max. - &  % dimensions in mm 9.8 3.4 1.4 8.89 1.27 0.9 secondary signal pattern (connected no. & - - ) keep out area primary signal pattern (connected no.  - % ) keep out area  % - & ? conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
(15/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. packaging styles quantity : 1000pieces/reel tape dimensions reel dimensions recommended soldering condition reflow soldering ? temperature is measured at the terminal portion of product (using thermocoupler for measurement). ? this profile is reference data we recommend. please check in your actual process. ? for reliable soldering, the t hickness of solder paste screen should be over the terminal co-planality. ? the cutted end of terminal has no plating(out of subject of solder ability). recommended condition for long term store when it stores for a long term, please avoid place of high tempera- ture and high humidity. recommend that it uses after the delivery within 1year. temperature range: +5 to +30c humidity: 60(%)rh max. 24 0.3 (12.4) 11.5 1.75 4 10 5.9 2 12 ?1.5+0.1, -0 0.4 dimensions in mm ?330typ. 30.4max. 2 0.5 ? 13 0.2 ? 21 0.8 dimensions in mm 260?c max. 230?c 165 15?c 2?c/s 120s max. 1 to 2?c/s time ( s ) natural cooling 30s max.
(16/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. tla-6t214alf(-t) iso8802.3(ieee802.3) 10/100/1000base-t features ? product conforming to rohs directive. ? can be mounted with lead-free solder (260c max.). ? 16-pin smd package(1.27mm=50mil pin pitch). ? low profile (h)2.1mm max. for note pc application. ? excellent common mode noise suppression. ? inductance is 350h or greater (f=100khz, dc bias=8ma). ? using the high-quality and wide-band ferrite cores for lan. ? packaging specification is taping and bulk(tla-6t214alf-t: tape and reel, tla-6t214alf: bulk). general specifications shapes and dimensions circuit diagram recommended pc board pattern electrical characteristics ? ta=25c pulse transformer 2 common-mode choke 2 port 1 temperature ranges operating 0 to +70c storage C40 to +85c withstanding voltage erms:1500v[60s] part no. turns ratio   : - + , $ # % : ' ( & inductance ( p h)min. [dc bias 8ma, 100khz] - - , ' - & insertion loss (db)max. [0.1 to 125mhz]   - - , ' & - $ % inter-winding stray capacitance (pf)max.[100khz]   - - , ' & - $ % tla-6t214alf(-t) 1ct:1ct 350 1 25 1ct:1ct 350 1 25 12.70max. 2.10max. 9.47 0.2 8.37typ. 0.95typ. - + ( &  # % tdk ??? part no. lot no. 0.45typ. 1.27typ. 0.25typ. ??? : country of origin dimensions in mm 0.10max. - , + ( ' &   # $ % rx tx 1ct:1ct 1ct:1ct 8.89 dimensions in mm 1.27 0.9 10.07 1.8 ? conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
(17/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. packaging styles quantity : 1500pieces/reel tape dimensions reel dimensions recommended soldering condition reflow soldering ? temperature is measured at the terminal portion of product (using thermocoupler for measurement). ? this profile is reference data we recommend. please check in your actual process. ? for reliable soldering, the t hickness of solder paste screen should be over the terminal co-planality. ? the cutted end of terminal has no plating(out of subject of solder ability). recommended store condition the product is packaged by anti-humid al bag, in order to keep a good solder ability condition and resistance to soldering heat for products. ? before aluminum bag opening temperature range: +5 to +40c humidity: 90(%)rh max. storage period: 1year ? after aluminum bag opening temperature range: +5 to +30c humidity: 60(%)rh max. storage period: 1week 240.3 (13.4) 11.5 2.2 10 2 12 0.3 ?1.5+0.1, -0 1.75 4 dimensions in mm ?330typ. 30.4max. 2 0.5 ? 13 0.2 ? 21 0.8 dimensions in mm 260?c max. 230?c 165 15?c 2?c/s 120s max. 1 to 2?c/s time ( s ) natural cooling 30s max.
(18/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. tla-6t213lf(-t) iso8802.3(ieee802.3) 10/100/1000base-t features ? product conforming to rohs directive. ? can be mounted with lead-free solder (260c max.). ? 12-pin smd package(1.27mm=50mil pin pitch). ? because it is low profile design of 2.2mm max., space saving is possible and is suitable for notebook pc. ? excellent common mode noise suppression. ? inductance is 350h or greater (f=100khz, dc bias=8ma). ? using the high-quality and wide-band ferrite cores for lan. ? packaging specification is taping and bulk(tla-6t213lf-t: tape and reel, tla-6t213lf: bulk). general specifications shapes and dimensions circuit diagram recommended pc board pattern electrical characteristics ? ta=25c pulse transformer 2 common-mode choke 2 port 1 temperature ranges operating 0 to +70c storage C40 to +85c withstanding voltage erms:1500v[60s] part no. turns ratio   : ) ' ( " ! # : % & $ inductance ( p h)min. [dc bias 8ma, 100khz] ) - ( % - $ insertion loss (db)max. [0.1 to 100mhz]   - ) ( % $ - " # inter-winding stray capacitance (pf)max.[100khz]   - ) ( % $ - " # tla-6t213lf(-t) 1ct:1ct 350 1 25 8.4max. 2.2max. 9.47 0.25 8.5typ. 0.8typ.   # tdk ??? part no. lot no. 0.45typ. 1.27typ. 0.2typ. ??? : country of origin dimensions in mm 0.10max.  ??    ?? ? rx tx 1ct:1ct 1ct:1ct 6.35 dimensions in mm 1.27 0.9 10.2 1.65 conformity to ros directie: tis means tat, in conformity it e directie 200295ec, lead, cadmium, mercury, exaalent cromium, and specific romine-ased flame retardants, pbb and pbde, ae not een used, except for exempted applications.
(19/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. packaging styles quantity : 1500pieces/reel tape dimensions reel dimensions recommended soldering condition reflow soldering ? temperature is measured at the terminal portion of product (using thermocoupler for measurement). ? this profile is reference data we recommend. please check in your actual process. ? for reliable soldering, the t hickness of solder paste screen should be over the terminal co-planality. ? the cutted end of terminal has no plating(out of subject of solder ability). recommended store condition the product is packaged by anti-humid al bag, in order to keep a good solder ability condition and resistance to soldering heat for products. ? before aluminum bag opening temperature range: +5 to +40c humidity: 90(%)rh max. storage period: 1year ? after aluminum bag opening temperature range: +5 to +30c humidity: 60(%)rh max. storage period: 1week 160.3 ( 8.8 ) 7.5 1.75 4 10 2.2 2 12 ?1.5+0.1, -0 0.3 dimensions in mm ?330typ. 22.4max. 2 0.5 ? 13 0.2 ? 21 0.8 dimensions in mm 260?c max. 230?c 165 15?c 2?c/s 120s max. 1 to 2?c/s time ( s ) natural cooling 30s max.
(20/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. tla-7t201lf(-t) iso8802.3(ieee802.3) 10/100/1000base-t features ? product conforming to rohs directive. ? can be mounted with lead-free solder (260c max.). ? 24-pin smd package(1.27mm=50mil pin pitch). ? because it is low profile design of 2.2mm max., space saving is possible and is suitable for notebook pc. ? excellent common mode noise suppression. ? inductance is 350h or greater (f=100khz, dc bias=8ma). ? using the high-quality and wide-band ferrite cores for lan. ? packaging specification is taping and bulk(tla-7t201lf-t: tape and reel, tla-7t201lf: bulk). general specifications shapes and dimensions circuit diagram recommended pc board pattern electrical characteristics ? ta=25c pulse transformer 4 common-mode choke 4 port 1[1000base-t] temperature ranges operating 0 to +70c storage C40 to +85c withstanding voltage erms:1500v[60s] part no. turns ratio   : 5 3 4 " ! # : 1 2 0 $ & % : / - . ( ' ) : + , * inductance ( p h)min. [dc bias 8ma, 100khz] 5 - 4 1 - 0 / - . + - * insertion loss (db)max. [0.1 to 100mhz]   - 5 4 " # - 1 0 $ % - / . ( ) - + * inter-winding stray capacitance (pf)max.[100khz]   - 5 4 " # - 1 0 $ % - / . ( ) - + * tla-7t201lf(-t) 1ct:1ct 350 1 25 16max. 2.2max. 9.47 0.25 8.5typ. 0.8typ. 5y  tdk ??? part no. lot no. 0.45typ. 1.27typ. 0.2typ. ??? : country of origin dimensions in mm 0.10max. 5 4 3 2 1 0   ?? ? 1ct:1ct 1ct:1ct / . - , + * $ % & ' ( ) 1ct:1ct 1ct:1ct 13.97 dimensions in mm 1.27 0.9 10.2 1.65 conformity to ros directie: tis means tat, in conformity it e directie 200295ec, lead, cadmium, mercury, exaalent cromium, and specific romine-ased flame retardants, pbb and pbde, ae not een used, except for exempted applications.
(21/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. packaging styles quantity : 1500pieces/reel tape dimensions reel dimensions recommended soldering condition reflow soldering ? temperature is measured at the terminal portion of product (using thermocoupler for measurement). ? this profile is reference data we recommend. please check in your actual process. ? for reliable soldering, the t hickness of solder paste screen should be over the terminal co-planality. ? the cutted end of terminal has no plating(out of subject of solder ability). recommended store condition the product is packaged by anti-humid al bag, in order to keep a good solder ability condition and resistance to soldering heat for products. ? before aluminum bag opening temperature range: +5 to +40c humidity: 90(%)rh max. storage period: 1year ? after aluminum bag opening temperature range: +5 to +30c humidity: 60(%)rh max. storage period: 1week 240.3 ( 16.2 ) 11.5 2.2 10 2 12 0.3 ?1.5+0.1, -0 1.75 4 dimensions in mm ?330typ. 30.4max. 2 0.5 ? 13 0.2 ? 21 0.8 dimensions in mm 260?c max. 230?c 165 15?c 2?c/s 120s max. 1 to 2?c/s time ( s ) natural cooling 30s max.
(22/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. tla-6t406(-t) iso8802.3(ieee802.3) 10/100base-tx features ? product conforming to rohs directive. ? can be mounted with lead-free solder (250c max.). ? 40-pin smd package(1.27mm=50mil pin pitch) for quad port. ? excellent common-mode noise suppression. ? inductance is 350h or greater (f=100khz, dc bias=8ma). ? using the high-quality and wide-band ferrite cores for lan. ? packaging specification is taping and bulk(tla-6t406-t: tape and reel, tla-6t406: bulk). general specifications shapes and dimensions circuit diagram recommended pc board pattern electrical characteristics ? ta=25c pulse transformer 8 common-mode choke 8 port 4 temperature ranges operating 0 to +70c storage C40 to +85c withstanding voltage erms:1500v[60s] part no. tu r n s r a t i o   : e c d ..... ! " : b c a ..... inductance ( p h)min. [dc bias 8ma, 100khz] e - d ...... b - a ...... insertion loss (db)max. [0.1 to 100mhz]   - e d ..... ! " - b a ..... inter-winding stray capacitance (pf)max.[100khz]   - e d ..... ! " - b a ..... tla-6t406(-t) 1ct:1ct 350 1 40 1ct:1ct 350 1 40 e d   c tx 1ct:1ct b a ! " rx 1ct:1ct @ ? # $ % > rx 1ct:1ct = < & ' tx 1ct:1ct ; : ( ) * 9 tx 1ct:1ct 8 7 + , rx 1ct:1ct 6 5 - . / 4 rx 1ct:1ct 3 2 0 1 tx 1ct:1ct ??? : country of origin dimensions in mm 15.7 0.25 12.2typ. 25.9max. tdk ??? part no. lot no. 0.45typ. 1.27typ. 24.13typ. ( 1.27 19 ) 5.8max. 0.8typ. 0.25typ. e 2  1 0.15max. 8.7 13.2 16.2 24.13 ( 1.27 19 ) 1.27 0.65 dimensions in mm secondary signal pattern (connected no. 2 - e ) keep out area primary signal pattern (connected no.  - 1 ) keep out area e 2  1 ? conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
(23/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. packaging styles quantity : 500pieces/reel tape dimensions reel dimensions recommended soldering condition reflow soldering ? temperature is measured at the terminal portion of product (using thermocoupler for measurement). ? this profile is reference data we recommend. please check in your actual process. ? for reliable soldering, the t hickness of solder paste screen should be over the terminal co-planality. ? the cutted end of terminal has no plating(out of subject of solder ability). recommended store condition the product is packaged by anti-humid al bag, in order to keep a good solder ability condition and resistance to soldering heat for products. ? before aluminum bag opening temperature range: +5 to +40c humidity: 90(%)rh max. storage period: 1year ? after aluminum bag opening temperature range: +5 to +30c humidity: 60(%)rh max. storage period: 1week 6 0.5 0.05 40.4 44 0.3 (26.3) 20.2 16.1 4 ?1.5+0.1, -0 2 1.75 1.7 dimensions in mm 20 ?330typ. 50.4max. 2 0.5 ? 13 0.2 ? 21 0.8 dimensions in mm 250?c max. 230?c 165 15?c 2?c/s 120s max. 1 to 2?c/s time ( s ) natural cooling 30s max.
(24/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. tla-7t101lf(-t) iso8802.3(ieee802.3) 10/100/1000base-t features ? product conforming to rohs directive. ? can be mounted with lead-free solder (260c max.). ? 24-pin smd package(1.27mm=50mil pin pitch). ? excellent common-mode noise suppression. ? inductance is 350h or greater (f=100khz, dc bias=8ma). ? using the high-quality and wide-band ferrite cores for lan. ? packaging specification is taping and bulk(tla-7t101lf-t: tape and reel, tla-7t101lf: bulk). general specifications shapes and dimensions circuit diagram recommended pc board pattern electrical characteristics ? ta=25c pulse transformer 4 common-mode choke 4 port 1(1000base-t) temperature ranges operating C40 to +85c storage C40 to +85c withstanding voltage erms:1500v[60s] part no. turns ratio   : 4 5 3 " ! # : 1 2 0 % $ & : . / - ( ' ) : + , * inductance ( p h)min. [dc bias 8ma, 100khz] 4 - 3 1 - 0 . - - + - * insertion loss (db)max. [0.1 to 100mhz]  - 4 3 " # - 1 0 % & - . - ( ) - + * inter-winding stray capacitance (pf)max.[100khz]  - 4 3 " # - 1 0 % & - . - ( ) - + * tla-7t101lf(-t) 1ct:1ct 350 1 25 1.27typ. 15.82max. 5.9max. 9.14 0.2 6.74typ. 0.5typ. 5 * ? ) tdk ??? part no. lot no. 0.45typ. 0.25typ. ??? : country of origin dimensions in mm 0.10max. dimensions in mm 9.74 3.34 1.4 13.97 1.27 0.9 secondary signal pattern (connected no. - ) keep out area primary signal pattern (connected no. - ) keep out area conformity to ros directie: tis means tat, in conformity it e directie 200295ec, lead, cadmium, mercury, exaalent cromium, and specific romine-ased flame retardants, pbb and pbde, ae not een used, except for exempted applications.
(25/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. packaging styles quantity : 1000pieces/reel tape dimensions reel dimensions recommended soldering condition reflow soldering ? temperature is measured at the terminal portion of product (using thermocoupler for measurement). ? this profile is reference data we recommend. please check in your actual process. ? for reliable soldering, the t hickness of solder paste screen should be over the terminal co-planality. ? the cutted end of terminal has no plating(out of subject of solder ability). recommended condition for long term store when it stores for a long term, please avoid place of high tempera- ture and high humidity. recommend that it uses after the delivery within 1year. temperature range: +5 to +30c humidity: 60(%)rh max. 24 0.3 (15.9) 11.5 1.75 4 9.8 5.9 2 12 ?1.5+0.1, -0 0.4 dimensions in mm ?330typ. 30.4max. 2 0.5 ? 13 0.2 ? 21 0.8 dimensions in mm 260?c max. 230?c 165 15?c 2?c/s 120s max. 1 to 2?c/s time ( s ) natural cooling 30s max.
(26/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. pulse transformers/connector type tla-6t776f iso8802.3(ieee802.3) 10/100base-tx features ? product conforming to rohs directive. ? pulse transformer, common mode choke, resistor and high with- standing voltage capacitor are integrated into rj-45 modular jack. ? excellent common mode noise suppression. ? inductance is 200h or greater (f=100khz, dc bias=8ma). ? the product features high quality, containing a self-winding surface-mount pulse transformer and common mode choke. general specifications shapes and dimensions circuit diagram recommended pc board pattern electrical characteristics ? ta=25c pulse transformer 2 common-mode choke 2 port 1 temperature ranges operating C40 to +85c storage C40 to +85c part no. turns ratio   : ? ! # " : 1 ? inductance ( p h)min. [dc bias 8ma, 100khz] - ? 1 - ? insertion loss (db)max. [0.1 to 100mhz]   - ? 1 ? - ! " tla-6t776f 1ct:1 200 1.5 1ct:1 200 1.5 2.5typ. 160.5 21.450.5 3.2typ. 13.850.5 3.2typ. dimensions in mm ? ? 1 o ? ? ? ?   ! " # $ % pcb cable tx rx 75 75 75 75 0.001 f n.c. pin: $ 16.0typ. 11.43typ. 8.89typ. 1.27typ. 15.75typ. 21.45typ. 10.92typ. 8.89typ. 3.05typ. dimensions in mm 2.54typ. 2-?1.6 8-?0.9 2-?3.25  " $  ! # % ? conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
(27/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. packaging styles tray : 360pieces/box recommended soldering condition flow soldering preheating: 90 to 130c for 30 to 45 seconds. soldering: 255c max. 51 seconds ? perform flow soldering from the underside of the board. ? the surface of plastic protrusions inserted into the board may melt, but this causes no problems with regard to electrical properties or mounting. ? the cutted end of terminal has no plating(out of subject of solder ability). recommended condition for long term store when it stores for a long term, please avoid place of high tempera- ture and high humidity. recommend that it uses after the delivery within 1year. temperature range: +5 to +40c humidity: 10 to 75%rh max. 255?c max. 130?c 90?c preheating: 30 to 45s time ( s ) natural cooling 51s
(28/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. tla-6t785 iso8802.3(ieee802.3) 10/100base-tx features ? product conforming to rohs directive. ? pulse transformer, common mode choke, resistor and high with- standing voltage capacitor are integrated into rj-45 modular jack. ? excellent common mode noise suppression. ? inductance is 200h or greater (f=100khz, dc bias=8ma). ? the product features high quality, containing a self-winding surface-mount pulse transformer and common mode choke. general specifications shapes and dimensions circuit diagram recommended pc board pattern electrical characteristics ? ta=25c pulse transformer 2 common-mode choke 2 port 1 temperature ranges operating C40 to +85c storage C40 to +85c part no. turns ratio   : ? ! # " : 1 ? inductance ( p h)min. [dc bias 8ma, 100khz] - ? 1 - ? insertion loss (db)max. [0.1 to 100mhz]   - ? 1 ? - ! " tla-6t785 1ct:1 200 1.5 1ct:1 200 1.5 18.20.5 dimensions in mm 160.5 120.5 18.50.5 ? ? 1 o ? ? ? ?   ! " # $ % pcb cable tx rx 75 75 75 75 0.001 f n.c. pin: $ 16.0typ. 11.43typ. dimensions in mm 8.89typ. 1.27typ. 4.55typ. 8.89typ. 3.05typ. 2.54typ. 2-?2.1 8-?0.9 2-?3.2  " $  ! # % ? conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
(29/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. packaging styles tray : 500pieces/box recommended soldering condition flow soldering preheating: 90 to 130c for 30 to 45 seconds. soldering: 255c max. 51 seconds ? perform flow soldering from the underside of the board. ? the surface of plastic protrusions inserted into the board may melt, but this causes no problems with regard to electrical properties or mounting. ? the cutted end of terminal has no plating(out of subject of solder ability). recommended condition for long term store when it stores for a long term, please avoid place of high tempera- ture and high humidity. recommend that it uses after the delivery within 1year. temperature range: +5 to +40c humidity: 10 to 75%rh max. 255?c max. 130?c 90?c preheating: 30 to 45s time ( s ) natural cooling 51s
(30/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. lc modules tla-3m103lf(-t) iso8802.3(ieee802.3) 10base-t features ? product conforming to rohs directive. ? can be mounted with lead-free solder (260c max.). ? 16-pin smd package (2.54mm=100mil pin pitch). ? pulse transformer, common-mode choke and low pass filter are integrated into 16-pin smd package. ? using the high-quality and wide-band ferrite cores for lan. ? packaging specification is taping and bulk(tla-3m103lf-t: tape and reel, tla-3m103lf: bulk). general specifications shapes and dimensions circuit diagram recommended pc board pattern electrical characteristics ? ta=25c low pass filter 2 pulse transformer 2 common-mode choke 2 port 1 temperature ranges operating 0 to +70c storage C40 to +85c withstanding voltage erms:1500v[60s] part no. insertion loss (db)max.[5 to 10mhz]  - % # & ( - - + attenuation (db)min.[30 to 100mhz]  - % # & ( - - + impedance ( : )typ.[5 to 10mhz]  - , % - # - - + , & - ( c.m.r.r. (db)min.[1 to 100mhz]  - % # - + - & ( tla-3m103lf(-t) 1 25 100, 100 25 1 25 100, 100 25 2.54typ. 25.7max. 5.95max. 12.5 0.3 9.5typ. 0.8typ. tdk ??? part no. lot no. 0.45typ. 0.25typ. ??? : country of origin dimensions in mm 0.10max. - &  % n.c. pins:  ! * ,  " % # $ - + ) & ( ' l.p. filter l.p. filter l.p. filter l.p. filter rx tx 1ct:1ct 1ct:1ct 17.78 dimensions in mm 2.54 1.02 13.72 2.54 ? conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
(31/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. packaging styles quantity : 600pieces/reel tape dimensions reel dimensions recommended soldering condition reflow soldering ? temperature is measured at the terminal portion of product (using thermocoupler for measurement). ? this profile is reference data we recommend. please check in your actual process. ? for reliable soldering, the t hickness of solder paste screen should be over the terminal co-planality. ? the cutted end of terminal has no plating(out of subject of solder ability). recommended condition for long term store when it stores for a long term, please avoid place of high tempera- ture and high humidity. recommend that it uses after the delivery within 1year. temperature range: +5 to +30c humidity: 60(%)rh max. 40.4 44 0.3 (25.9) 20.2 6.1 ?1.5+0.1, -0 1.75 0.4 13.1 2 16 4 1.7 dimensions in mm ?330typ. 50.4max. 2 0.5 ? 13 0.2 ? 21 0.8 dimensions in mm 260?c max. 230?c 165 15?c 2?c/s 120s max. 1 to 2?c/s time ( s ) natural cooling 30s max.
(32/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. pulse transformers/smd type alt4532 features ? the alt4532 series is a wound chip type pulse transformer developed for lans. ? compatible with 10base-t, 100base-tx, and 1000base-t. ? high-quality product with automatic winding. ? product conforming to rohs directive. applications lan interface portion of various devices such as network devices, communication devices, and digital home appliances product identification (1) series name (2) dimensions l u w (3) inductance[at 100khz/dc bias=8ma] 201 : 200h min. (4) packaging style t: ?330mm reel taping (5) tdk internal code specifications packaging style and quantities shapes and dimensions dimensions in mm recommended pc borard pattern measuring circuit electrical characteristics alt 4532 - 201 - t 001 (1) (2) (3) (4) (5) temperature range operating C40 to +85c storage(after mount) C40 to +85c packaging style reel quantity taping ?180mm 2000 pieces/reel ty p e l w t alt4532-171-t001 4.50.2 3.20.2 2.2max. alt4532-201-t001 4.50.2 3.20.2 2.9max. w t l 1 2 3 6 5 4 1.45 1.45 1.35 0.7 0.675 0.45 0.45 0.5 dimensions in mm 1.1 2 3 1 5 4 6 part no. turns ratio  #  : " ! inductance (h)min. [dc bias 8ma, 100khz]  -  " - ! insertion loss (db)max. [0.1 to 100mhz]   - " ! inter-winding stray capacitance (pf)max. [100khz] alt4532-171-t001 1ct : 1ct 170 2.5 35 alt4532-201-t001 1ct : 1ct 200 1.5 35 ? conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
(33/33) 006-02 / 20120414 / edlan_tla.fm ? all specifications are subject to change without notice. typical electrical characteristics insertion loss vs. frequency characteristics alt4532-171-t001 alt4532-201-t001 typical applications (100base-tx) insertion loss ( db ) frequency ( mhz ) 0 C 1.0 C 2.0 C 3.0 C 4.0 0.1 1 10 100 insertion loss ( db ) frequency ( mhz ) 0 C 1.0 C 2.0 C 3.0 C 4.0 0.1 1 10 100 lan ic lan connector note) peripher a l circ u it s differ depending on the ic us ed; check the circ u it s with the a pplic a tion note of the ic, etc. alt45 3 2-171-t001 alt45 3 2-201-t001 acm2012-201-2p acm2012- 3 61-2p acm2012-6 8 1-2p acm2012-102-2p p u l s e tr a n s former s common mode filter s


▲Up To Search▲   

 
Price & Availability of TLA-6T122LF

All Rights Reserved © IC-ON-LINE 2003 - 2022  
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]
 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X